451-500 Series
100mm Double Glazed System
The 451 Series is a wide pocket version of the 450-500 Series framing system for accommodating up to 29mm I.G. units
Types
- 4 sided captive glazed only
Features
- Waterproofing characteristics based on pressure equalisation principles
- Internal glazed wet seal for improved weatherproofing required on high-rise applications
- Accommodates I.G. units to 29mm.
- Compatible with 475 and 478 series door systems and 475 series sub-framing
Hardware
- Extruded external neoprene glazing gaskets
Limitations
-
Finish floor to finish floor spans not to exceed 3m (guide only dependent, upon
number of and position of transoms)
Note: Stack joint positioning relative to slab level will dramatically affect structural capabilities of the system. Optimum position between 15% and 20% of overall span height up from fixing point. - To comply with the appropriate design wind load requirements and glazing standards
Some dimensions detailed above may be nominal.
Due to continual product development, G.James reserves the right to change, delete or add any information, section profiles, construction details and specifications relating to this product without notice
Due to continual product development, G.James reserves the right to change, delete or add any information, section profiles, construction details and specifications relating to this product without notice
Specify This
To correctly specify this product, copy and paste this text block into your project documentation.
All windows shall be G.James 451-500 Series compliant with AS2047, glazed in accordance with AS1288 and installed to the manufacturers recommendations and details. All surface finishing shall be in accordance with AS1231 (Anodising) and/or AS3715 (Powder Coating).